PMB Slovakia

c378

Kodera C378

Maximum of 200sq cut and strip processing has been realized

Such thick wires have been processed by hand in the field such as cubicle, elevator, power plants where they handle high voltage electrical power lines.
KODERA’S delicate technique and adventurous idea have accomplished a special machine for very large wires in diameter.

Specifications

MODEL C378
OUTER DIMENSIONS W1,005mm ×D670mm ×H1,360mm
WEIGHT 590kg
POWER SUPPLY AC100V~AC240V(single phase)50Hz/60Hz
POWER CONSUMPTION(100V) 92W(Rated)560W(Max)
AIR SUPPLY 5Nℓ/min 0.5MPa※1
CUTTING LENGTH 180mm~99,999mm
CUTTING TOLERANCES ±( 0.1+0.0005×L )mm※2 
L : indicates a cutting length.
STRIPPING LENGTH FRONT END 0.1~160mm
REAR END 0.1~200mm
APPLICABLE WIRES TYPE Battery cable, W1, W2, VSF, IV, KV, UL,
Teflon , Glass Wire, etc
SIZE 200sq~AWG#2(30sq)※2
O.D. Max φ35mm※2
WIRE FEED SPEED Variable
CUTTER MATERIAL Ultra fine particle alloy
DRIVE SUPPLY Stepping pulse motor / Air cylinder

※1. Use clean,dry air.  ※2.Depending on the wire type.

Processing capacity (actual data)

Number of processed wires per hour

Total length Pieces  
 500mm 257 Processing conditions:
  • Both end stripping: 20 mm
  • Setting of speed: 9
  • Wire: WL1 38sq
 
1000mm  257
2000mm  212

Samples

img_c378-s0

Mám záujem o podobné riešenie

Radi Vám pripravíme nezáväznú cenovú ponuku a návrh technického riešenia presne podľa vašich požiadaviek.
Bezpečnostný kód