PMB Slovakia

PT50-1

Pull & Press Tester model series PT 50

General Information

  • Force Tester for pull and press force tests in material testing and quality control, e. g. for pull-off test at crimped terminals, connectors, components, etc.
  • Indication range: 0 to 500 N
  • Resolution: 0.5 N.
  • Accuracy class 0.5
  • Easy to operate and space-saving testers.
  • Manual operation by hand lever.
  • Model PTC 50 with hand lever and cable clamping fixture with automatic gripping during hand lever actuation.
  • Model PTH 50 with hand lever and load slide with precise linear motion, load slide stroke ca. 50 mm, quick change tool fitting on measuring point and load slide for clamping tool and test fixture assembly.
  • Indication and operation of the measuring system via durable infrared sensor screen with dot matrix LCD-Display.
  • High measuring accuracy and repeatability.
  • 10000 Hz internal update rate for exact force readings.
  • Peak Point Mode with indication of the highest measured force value.
  • Tracking Mode with indication of current force values.
  • Tare compensation.
  • Optical and acoustic overload indication.
  • Serial port for data output of measured value.
  • Setup menu for internal parameter setting and adjustment.
  • Mechanical overload protection of load cell up to 3500 N.
  • Maintenance-free and durable all metal construction.
  • Quick change tool mounting adapters for tool and test fixture assembly

Clamping Tools and Test Fixtures

Turntable UDT 100
Clamping Crowns SG 80
Quick Action Grippers KSH-6, KSP-8, SHA-12, SHA-20
Cable Clamps MK-8, DKS-20
Comb Tools KW 1, KW 2
Miniature Grips FSEL
Tool Set KBP for testing cable tie pistols
Step Cone KBS for testing cable ties
Tool Set KLH for insertion and extraction tests

Please see our catalogue for additional standard tools and tool specifications. Customer-specific special test fixtures and tools on request.

Technical specifications

Model Designations PTC 50, PTH 50
Indication Range 0 to 500 N.
Resolution: 0.5 N
Rel. accuracy error: ≤ ±0,5% ± LSD (within the measuring range).

Force Measuring System

  • Control Unit: Dimensions: ca. 125x105x70 mm (WxDxH);
  • Supply voltage: 12-24 V DC.
  • Force Transducer: DMS-load cells type MWM 80108 with integrated ADconverter and RS485 bus. Overload protection up to 3500 N.
  • Display: Dot matrix LCD display with LED background lighting, 128x64 pixel, 56.3x38.4 mm. LCD update rate: 5 Hz.
  • Operation: Operation of all displayed keys via infrared sensor screen.
  • Evaluation: Internal measuring rate: 10000 Hz;
  • Operating Modes: Tracking Mode and Peak Point Mode;
  • Tare compensation;
  • Single output of measured value via serial port;
  • Overload indication;
  • Setup Menu internal parameter selection and adjustment of measuring system;
  • Language for setup menu selectable: D, E
  • Serial Port: RS232C selectable parameters: 300-76800 Baud, 7/8 data bits, 1/2 stop bits, parity: none/even/odd. connector: RJ45.

Optional Accessories

  • Mini Table Printer
  • Data Transmission Cable for printer connection
  • Data Transmission Cable for PC connection
  • Keytast Interface
  • Please see our catalogue for additional accessories.

Mám záujem o podobné riešenie

Radi Vám pripravíme nezáväznú cenovú ponuku a návrh technického riešenia presne podľa vašich požiadaviek.
Bezpečnostný kód